Your position: Home > Time control > timer board-USB type

JY-18B coin operated USB time board with separate display time control Power Supply for USB devices

Item Code: JY-18B
Sold: 0
SKU:
184
    Please select the information you wantX
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units 999 in Stock
  • Description
Specifications

- Free to set up time, value, given time, time for warning sound, and coin and memory mode.

- Controls up to 2 sets of USB device.

 

 
Input Voltage DC+12V
Standby Display shows:00:00, rely: Normal Open (NO)
Accumulated time Yes, add time if receive signals again when time is running
Device input 2 set USB connector
Output 2 set USB connector
How it works
Mode 1 Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out
Mode 2
(Connect a button)
Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out
Pause
(connect a button)
Push button pause: it cuts off power when pause, display shows remaining time.  Re-supply power after push button pause again
Price/time setting Please reference to page 2
Operating Mode Please reference to page 3
 
Connection and Position


 

Setting

1

               
Please follow CODE ON DISPLAY and use button "S1" and "S2" to set up number
  • INPUT SIGNAL QUANTITY AND TIME
  1. Please press button "S4". “B” flashes. Please set up INPUT SIGNAL QUANTITY to active device (01-50).
  2. Please press button "S4", “A” flashes. Please set up TIME (01-99).
  3. Please press button "S4", “B” flashes. Please set up TIME (01-99).
  4. Please press button “S4” 4 TIMES.
  5. Please set up TIME for Warning Sound.
  6. Please press button "S4" to finish.
  • GIVEN TIME: Add time by free if input signals reach SETTING RATE during time is running.
    Example Setting: input signal to active device: 01, input signals for given time: 03 give time: 02:10
                   Add time “02:10” free if receive “3 signals” during time is running.
  1. Please press button "S4" 4 TIMES. “B” flashes. Please set up RATE OF INPUT SIGNAL QUANTITY.
  2. Please press button "S4", “A” flashes. Please set up GIVEN TIME.
  3. Please press button "S4", “B” flashes. Please set up GIVEN TIME.
  4. Please press button "S4" to finish.


     
  • Mode Setting
Please follow table to set up operating function:
  1. Please hold on button "S1" and "S2" simultaneously for 3 seconds to get into MODE SETTING.
  2. Please use button "S1" and button "S2" to set up number for CODE
  3. Please press button "S4" to switch to next code
Function Code on Display Description
A B
Running Time 01 01 Time runs down without pressing button
02 Time runs down by pressing button
Time Type 02 03 MINUTE: SECOND
04 HOUR: MINUTE
Memory 03 05 Yes: Remaining time keep running after power off and on
06 No: Standby power off and on
Back to standby 04 1-30 user has no action after push buttons or receive signals in setting time
Default: 01-03: Bold and base line. 04: not use the function.
Size and Connection Example
 

Customer Reviews
Average rating:

Share your thoughts with other customers

QQ