Your position: Home / coin acceptor / RS232-multi coin type

JY-910 RS232 Pulse Output 1-10 Type of Coins Multi Coin Acceptor to PC COM Interface

32810787424
Sold:3
    Please select the information you wantX
  • Material Type:
    Zinc alloy front plate
    Plastic front plate
  • Wire:
    defult
    + USB cable
    + COM extender
Quantity:
-
+
(600 available)
  • Description
  • Reviews
Specifications

1-product-

 

Plastic

1

 

 

Zinc alloy

鋅合金

1-1236

 

2-DESCRIPTION-

 

Connection 

  • POWER: you need to connect power even if you use RS232 only

 

接口-英

  • 5P WIRE (PULSE), 4P WIRE(RS232-COM)

    20180514_091230

Specification

Coin Diameter: 15mm-32mm          Atmospheric Pressure: 86Kpa—106Kpa        Signal Output:pulse and RS232   

Coin Thickness:1.2mm-3mm          Accuracy Rate of Identification:99.5%        Speed:≤0.6s

Working Voltage: DC +12V ±10%    Working Humidity:≤95%                               Working Current: 65mA ±5%

 

Connection and Switches

1

 

Please program coins based on following table:

Code

Description

Default

Range

Setting No.

Manual

PC

E

Total amount for coin types

01

1-10

A

-  Only on windows system

-    Reference to attachment 2

P + figure

P:Pulse output

01

1-99

Figure: Coin sorting order

A + figure

A:sample coin

None

 

B

Figure: Coin sorting order

F + figure

accuracy

05

1-10

C

Figure: Coin sorting order

1

NO and NC

NC

 

D

2

Duration:30ms, 50ms, and 100ms

100ms

 

AP

Collect received multi pulse to output 1 pulse

01

1-99

E

Re-count if it has no signal action after 1 minute

Example:
(1) 05- output 1 pulse signal per 5 collected pulse.
(2) if 3 pulse is collected and not any more after 1 minute, 3 collected pulse is removed for AP mode.

 

  • Setting Note

(1) Please use button “ADD” and “MINUS” to adjust number

     Please push button “SET” to switch to next code

     Please push button “SET” to skip, if you do not need to adjust for code, please push button SET to skip.

(2) Usually, free to use coin acceptor after set up A and B.
      C, D, and E is not necessary to adjust.

 

  • Manual Setting No.

A.1.Push button ADD, “E” shows up. Please adjust number.
    2.Push button SET, “P1” shows up. Please adjust number for first type of coin.
    3.Please push button SET, “P2 show up. Please adjust number for second type of coin.
    4.Please repeat No.3 to set up “P+ figure” until all type of coins is finished.

B.1.Hold on button SET for 3 seconds, “A1” shows up.
    2.Please push button SET, “A2” show up. Please adjust number for second type of coin
    3.Please repeat No.3 to set up “P+ figure” until all type of coins is finished.

C.1.Push button Minus, “F1” shows up. Please adjust number for first type of coin.
    2.Please push button “SET”, “F2” show up. Please adjust number for second type of coin.
    3.Please repeat No.2 to set up “F+ figure” until all type of coins is finished.
    Note: 1 is most accuracy.

D.1.Hold on button “ADD” for 3 seconds, “1” shows up. Please adjust to NO or NC
    2.Push button SET, “2” shows up. Please adjust to 30 (30ms) or 50(50ms) or 10(100ms)

E.1.Hold on button “SET” and “ADD” simultaneously, please adjust number for pulse.
    2.Push button SET to finish.
    3.Coin acceptor restarts automatically.

 

 

 

 

  • Baud Rate: 9600 bps
  • Connection:

manual 232_
 

  • PC Setting Panel:

3

READ

load value from connecting coin acceptor

Write

write current value to coin acceptor

Load

load value from file

Save

save current value to file

Active

tick- Enable to use the channel

not Tick- not enable to use the channel

Click Read -> all value shows up -> change value -> Click Write

 

 

  • Test Panel:

4

1.Choose interface

2.Click Start

Average rating:
Share your thoughts with other customers
Write a review