RS232 pulse signal coin banknote card writer recharger for pre-paid card, card reader, vending machine

How will card writer work

• Support Coin/bill acceptor, pulse input, RS232 input
• English character on Display
• Talk to PC software: create card type, check income, and change setting.
• Recharge card

Interface and Connection

				1: input voltage to power on: +5V 2:Display    3: USB to PC    4: keyboard 5/6: pulse input device B/A 7: Voltage for input device:+DC12V 8: RS232 input 9: back of keyboard: card sense zone 10: Define key for switch button 11: white lead
No.1 connection				No.5/ No.6 connection
Red:DC+5V Black: GND USB to adaptor				Orange: DC+12v White: Pulse signal Green: GND
No.10: Define Key for connecting to switch button
	Key	Credit	F		Check	Cancel	1	2	3
	Pin	5+8	5+7		1+7	5+6	2+6	2+7	2+8
	Key	4	5		6	7	8	9	0
	Pin	3+6	3+7		3+8	4+6	4+7	4+8	1+6

Function Summary

1. Turn on poweràEnter passwordà Press Enter     Default password: 999999
2. Please follow function on table 1 to enter Key.
   Switch to next option: press any key

Table 1

​-------------------------------------------------------- Page 1 ​--------------------------------------------------------

Function description

1. 1. Credit:
   - Credit by keyboard: press Credit->
   enter valueà shows value->
   press Enter
   - Credit by coin/bill acceptor:
    press Creditàinsert coins/banknotesà Display shows value->press Enter
2. 2. Change password:
   Press F and 2->
   enter old password->
   enter new passwordà
   enter new password again->
   press Enter
3. 3. Press F and 6-
   show input device A+B total income->
    press any key->
   show previous input device A+B total income
4. Serial number: functions work for cards with defined same serial number only.
5. Press F and 7->
   show input device A total income->press any key->
   show input device B total incomeà press any key->
    show RS232 total amount
6. Rate of received pulse: multiply received signals
   For example: set as 02, receive 1 pulse signal: 2 X 1=2 signals
   Press F,3,and 1àshow present valueàenter valueàpress enter
7. Clear user card: Remove balance
   Press F, 3, and 0->
    show “Clear?”->
   sense user card->
   Press “Enter”
8. Read card:

Press “Check”àSense card

​-------------------------------------------------------- Page 2 ​--------------------------------------------------------

Software

1. Create card type: Please follow table 2 to create.
   Open software “Card Type Creator”àChoose card type
   fill in serial number->sense card->click write to card->success
   

Table 2

1. Function Set up- Management card
   Please follow table 3 to set up on Management card

Table 3

1. Function Set up- Inspection card:
   Sense “inspection card”->click Record check->show saved record
   

​-------------------------------------------------------- Page 3 ​--------------------------------------------------------

Reference Item:

card reader: juyao66.com/rs232-or-pulse-signal-card-reader-for-ic-card-payment-system_p0290.html

card: juyao66.com/85cm-x-54cm-pre-paid-white-printed-card-for-for-juyao-card-reader-writer_p0286.html