3 digits timer board coin operated Timer Control Board Power Supply for coin acceptor selector device etc.
Description
Input Voltage |
DC+12V |
Standby |
Display shows:0.00, reply: normal close (NC) |
Time Type |
(1) HOUR: MINUTE (2) MINUTE:SECOND are adjustable |
Warning Sound |
Beeps in cycle when remaining time:30 seconds |
Memory |
Yes, it keeps running remaining time when power off and on |
Accumulated time |
Yes, add time if receive signals again when time is running |
How it works |
Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out |
Pause (connect a button) |
(1) Push button pause: it cuts off power when pause, display shows remaining time. (2) Re-supply power after push button pause again. |
Connection
1:Display 2:20 cm white lead
3:button DOWN 4:button UP 5:button MODE
6:Yellow:DC12V, White:Signal wire, Black: GND
7:OUTPUT power to controlling device:
control single wire from controlling device.
8:pausing 9:dip switch for time type
SETTING
Max Time:9:59
Display: 9.59
A: 1 digit: either HOUR or MINUTE
B: 2 digits: either MINUTE or SECOND
1. Please turn off power.
2. Please switch (9): ON: HOUR: MINUTE OFF: MINUTE:SECOND
1. Please press button (5), please use button (4) and (3) to adjust No.A (1-9).
2. Please press button (5), please use button (4) and (3) to adjust No.B (01-59).
3. Please press button (5) to finish.
1.Please hold button (5) for seconds. Please use button UP (4) and DOWN (5) to set up Number
2.Please press button (5) to finish.
EXAMPLE